#Minicom use serial#

#Minicom use serial#

Remove all references to ttyAMA0 (which is the name of the serial port). txtДwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait You can disable it by editing the file / boot / cmdline. Arduino) at bootup, it will receive this information over the serial port, so it is up to you to decide whether this is a problem or not. Disabling this bootup information is optional and you may want to leave this enabled as it is sometimes useful to see what is happening at bootup.

When the Raspberry Pi boots up, all the bootup information is sent to the serial port. T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100Дisable it by adding a # character to the beginning. Edit the file and move to the end of the file. This file has the command to enable the login prompt and this needs to be disabled. There are two files that need to be edited To enable the serial port for your own use you need to disable login on the port. Needless to say you will need some other way to login to the Raspberry Pi, and we suggest doing this over the network using an SSH connection.

Arduino), the serial port console login needs to be disabled. To be able to use the serial port to connect and talk to other devices (e.g.

Whilst this is useful if you want to login using the serial port, it means you can't use the Serial Port in your programs. By default the Raspberry PiвЂ™s serial port is configured to be used for console input/output.